RB Designs LLC
Machine Shop Services ~ Motorcycle ~ ATV ~ PWC ~ Small Engine ~ Custom Parts Machining
rb_designs_llc022008.gif rb_designs_llc022007.gif rb_designs_llc022006.gif rb_designs_llc022005.gif rb_designs_llc022004.gif rb_designs_llc022003.gif rb_designs_llc022002.gif
HOME
Crank Rebuilding
Contact Us
Payment & Shipping
Machine Shop
Speciality Items
Carb Mods
Head Mods
Cylinder Boring
KTM Head Mods
$90.00 For the stepped heads (with locating lip)
$75.00 For flat surface heads (dowel pin locating)
Plus Shipping and Handling 
Shipping and Handling; $18.00 alone,
or $5.00 when shipped with carb mod.
 
 
 
Perk up the performance of your KTM with our tried and true head modification. This modification is a great enhancer to all of your performance up grades or as a stand alone mod.

Makes fine tuning and jetting more predictable with optimized combustion. This mod will increase torque, snap, ride-ability and helps with fuel mileage too!

arrowprev.png
Payment and Shipping Instructions
Please feel free to contact us for more information
Sorry, we no longer do the 200 head mods
Head Mod Requirements

When sending your head, make sure it is very clean and coolant free. Please remove the water spout on the top of the head (if it uses a removable one) and remove any alignment pins that may have stuck in the head. The head must be totally stock with no other mods, or blow-up damage, or detonation damage.

ALL heads need to have a Squish Band Clearance Test done and at least 3 test solders supplied with the head to be modified.